HPL

Industrial Switchgears

  • ACB

    (Air Circuit Breaker)

    +

    Salient Features

    • Widest Range of 3P & 4P from 630A to 6300A
    • Insulation Voltage: 1000V AC
    • Power Voltage: upto 690V & even beyond.
    • Impulse Withstand Voltage (Uimp) : 12 KV
    • Ics & Icu : 100% , From 50 KA to 120 KA at 500V AC
    • Icw Rating: 50 KA for 1 Sec to 100 KA for 1 Sec, 2 & 3 Sec capability also available.
    • Termination: Suitable for Aluminium , Copper & All combinations available. Conversion of horizontal to vertical & vice versa (upto 3200 A) at site.
    • Ready to close switch and manual reset button available as standard.
    • Tested & certified as per IEC 60947-1, IEC -60947-2
    • Very high mechanical & electrical endurance ( without maintenance )
    • Uniform height & depth across the range , very compact in size
    • Rating at higher voltages: available on request
    • Accessories: Wide range & user friendly
  • ACB

    Trip Relay (OCR)

    +

    Salient Features

    • It offers advance measurement functions, communication functions & additional protection function over and above the traditional
    • Current protection : LSIG, Zone Selectivity
    • Other Protection: Earth Leakage (optional),Unbalance, Reverse Power
    • Measurement Function : Current(R/S/T/N), Power Factor, Frequency , Demand
    • Pre-trip alarm
    • Digital output
    • Full set of communication architecture
    • Fault/event recording : upto 256
  • Controlgear

    Power Contactors

    +

    Salient Features

    • Widest Range of 3P & 4P Contactors upto 800A
    • 25 Models in just 9 Frames
    • Capacitor Duty Contactors upto 62kvar
    • Contactors suitable for Crane,Mining, & other special application also available
    • Highest Electrical Life upto 2.5 Million operations
    • Confirmity to latest IEC / IS Standards
    • Site Mounted add on accessories
    • Safety Cover to avoid dust
    • Type II co-ordination
    • CE Marked & UL Certified
  • Controlgear

    Thermal Overload Relays

    +

    Salient Features

    • Differential Bimetallic Overload Relays from 0.1A to 800A
    • Built in 1NO+1NC potential free contacts
    • Choice of Contactor or Separate Mounting
    • Option of Manual / Auto Reset
    • Ambient temperature compensated
    • Protection against Overload, Phase unbalance & Single phasing
  • Controlgear

    Control Contactors

    +

    Salient Features

    • Basic 4 Pole Unit
    • 12 Contacts combination Possible
    • AC & DC Control
    • Ith (Continuous current ) 16A
    • DIN Rail or Screw Mounting
    • Site Mounted accessories
  • MCCB

    Moulded Case Circuit Breaker TAB

    +

    Salient Features

    • Available in various Frame Sizes - Rated current from 10A - 160A/ 63A - 250A /250A - 630A & in different breaking capacity (from 10kA to 65A) as per IS/IEC - 60947- 2
    • Available in both fixed & adjustable Thermal & Magnetic settings
    • Available in 1Pole, 2Pole,3Pole & 4Pole versions
    • FP version available with neutral fully protected
    • Adjustability- offers close protection to different load condition
    • Line Load reversibility
    • Low let through energy
    • Very compact in size
    • Wide range of internal & external accessories
    • Enhanced life
    • ROHS Compliant
    • Available in Enclosed Version
  • MCCB

    Moulded Case Circuit Breaker Load Guard

    +

    Salient Features

    • Available in various frame sizes - Rated current from 10A - 800A as per IS/IEC - 60947- 2
    • Wide range of breaking capacity available from 10kA to 65kA
    • Available in 2Pole,3Pole & 4Pole versions
    • Available in both fixed & adjustable magnetic settings
    • Low let through energy
    • Available of motor driven operation mechanism
    • Line Load reversibility
    • Positive isolation
    • High repeat accuracy- reliable protection
    • Available with wide range of accessories: shunt trip, under voltage, auxiliary contact, alarm contact & rotary handle
    • Also available in enclosed version
  • MCCB

    Moulded Case Circuit Breaker Distribution Panel

    +

    Salient Features

    • Range - 4,6,8,10,12 ways
    • No. of poles of MCCB -3/4, 415V AC
    • Incoming - 160A / 250A / 400A /630A
    • Outgoing - 160A / 250A
    • Fully Shrouded bus bar with high short circuit withstand
    • Multifunction Digital Metering - Optional
    • Provision for single door /double door
    • High Reliable tested solution
  • MCCB

    Moulded Case Circuit Breaker Enclosure

    +

    Salient Features

    • These environment friendly enclosures (For MCCB units) while offering precise overload & short circuit protections as standard, discharge the power switching function efficiently with enhanced life & human safety.
    • Minimum maintenance.
    • User friendly, robust & compact.
    • Highly reliable tested solution.
    • Suitable for Industrial, Domestic & Commercial Installations.
    • Extends Safety
  • Fuse, Holder & Base

    HRC Fuse (BS & DIN Type)

    +

    Salient Features

    • Range : 2 Amps to 630 Amps
    • Breaking capacity >80kA 415V, 50Hz AC
    • Conforms to IS : 13703 -2 & IEC 269 -2
    • Tested at CPRI
    • Size 000 also available from 6A to 100A
  • Fuse, Holder & Base

    HRC Fuse Base (BS & DIN Type)

    +

    Salient Features

    • Range (DIN type base) : upto 630A
    • Range (BS type Fuse Holder) : 20 to 125A
    • Front & Busbar options for fuse holders( BS type)
    • Conforms to IS:13703 - 2 , IEC:269-2
    • Low Watt loss
    • Tested at CPRI
  • Disconnector & Fuse

    Switch Disconnector Fuse

    +

    Salient Features

    • Range : 32A to 800A, TP, TPN & 4 Pole, 415V, 50Hz
    • Conforms to latest IS/IEC 60947-3
    • Tested at CPRI, Bhopal for AC-23A duty (32A to 800A)
    • Multiple Roller Contact Mechanism for enhanced life and better performance
    • Available in open execution / sheet steel enclosure
    • Available with BS & DIN Type HRC Fuse
    • Rated insulation voltage - 1000V
  • Disconnector & Fuse

    Load Break Switch (Isolator)

    +

    Salient Features

    • Range : 32A - 3150 TP, TPN & FP 415V, 50Hz
    • Conforms to latest IS/IEC 60947-3
    • Multiple roller contact mechanism for enhanced life & better performance
    • Available in open execution & sheet steel enclosure
    • Suitable for capacitor duty Application also.
    • Can meet the need of DC application
    • Available with all accessories
  • Changeover Switches

    RTS

    +

    Salient Features

    • Range : 40A to 3200A as per IEC 60947 - 6 - 1
    • Intelligent integration of control
    • Compact Secure Transfer System
    • Easy Selection of automatic & manual control
    • Flexible Upgradability : Plug-in optional modules, dedicated accessories, Double Power Supply module
    • Available in Open Execution & SS Enclosure
  • Changeover Switches

    Digital Programmable Changeover Switch

    +

    Salient Features

    • Range 125 to 1600A, 4 Pole, 415V AC
    • Programmable and digital display of parameters with the use of C30 Controller and D20 display unit
    • Timer facility for changeover and generator operation
    • Indication for fault condition
    • Integrated system employing state of the art technology
    • Available in Open Execution & SS Enclosure
  • Changeover Switches

    Motorised Changeover Switch

    +

    Salient Features

    • Range : 125 - 1600 A, 4P, 415V AC as per IS : 13947 Part 3
    • Suitable for AMF panel / Automatic Transfer Switch
    • Padlocking possible in 'OFF' position only
    • Provides two stable positions I & II in case of control supply failure
    • Handle arrangement is provided for manual operation to put the switch in off position or selecting the supply in Emergency
    • High thermal & dynamic strength to withstand fused (80kA rms) short circuit current
    • Available in Open Execution & SS Enclosure
  • Changeover Switches

    AtyS M

    +

    Salient Features

    • Range 63A to 160A , 4 Pole on load ATS as per IEC 60947-6-1
    • Fully integrated control & automatic changeover functions
    • Two power switches mechanically and electrically interlocked
    • Enables fast switching operation ( > 90ms) suitable for UPS
    • Complete range of accessories available
    • Available in Open Execution & SS Enclosure
  • Changeover Switches

    On load Changeover Switch AV

    +

    Salient Features

    • Range : 63 - 3150A, 4 Pole, 415 VAC, AC 23A as per IS 13947 Part 3
    • Silver Plated Current Carrying Parts
    • Arc Chute Plates for Enhanced Electrical & Mechanical Endurance
    • Source Separator, Terminal Shroud, Phase Barrier & Fuse Sheild as standard feature
    • Auxiiliary Contract Plug-In-mounting Pre-wired Kit
    • Axilliary Contacts upto 2NO-2NC(optional)
    • Compact Design, Total Safety
    • Self Extinguishing Fiberglass re-inforced insulating body
    • Flexibility for Termination of Supply
    • Mounting possible in both Horizontal & Vertical position
    • Available in open execution / sheet steel enclosure
  • Changeover Switches

    Switch Fuse Changeover AV

    +

    Salient Features

    • Range : 125A - 630A, 4 Pole, 415VAC, AC 23A as per IS 13947 Part 3
    • Silver plated current carrying parts
    • Arc Chute Plates for enhanced electrical & Mechanical endurance
    • Source Separator, Terminal Shroud, Phase Barrier & Fuse Sheild as standard feature
    • Auxiiliary Contract Plug-In-mounting Pre-wired Kit
    • Compact Design, total safety
    • Self extinguishing fiberglass re-inforced insulating body
    • Protection against over current and short circuit faults by fuses (80kA rms) of high rupturing capacity
    • Available in open execution / sheet steel enclosure
  • Changeover Switches

    Onload Bypass Switch AV

    +

    Salient Features

    • Range : 125A - 1600A, 4 Pole, 415 VAC, AC 23A as per IS 13947 Part 3
    • Silver plated current carrying parts
    • Arc Chute Plates for enhanced electrical & Mechanical endurance
    • Source Separator, Terminal Shroud, Phase Barrier as standard feature
    • Auxiiliary Contract Plug-In-mounting Pre-wired Kit
    • Compact Design, total safety
    • Self extinguishing fiberglass re-inforced insulating body
    • Switch is designed for specific need in IT industries where UPS and Servo stabilizer provides main source of supply
    • Available in open execution / sheet steel enclosure
  • Changeover Switches

    Cubicle Load Break Switch AV

    +

    Salient Features

    • Range : 63 - 3150A, 4 Pole, 415 VAC, AC 23A as per IS 13947 Part 3
    • Silver plated current carrying parts
    • Arc Chute Plates for enhanced electrical & Mechanical endurance
    • Terminal Shroud, Phase Barrier as standard feature
    • Auxiiliary Contract Plug-In-mounting Pre-wired Kit
    • Compact Design, Total Safety
    • Self extinguishing fiberglass re-inforced insulating body
    • Flexibility for termination of supply
    • Mounting possible in both horizontal & vertical position
    • Available in open execution / sheet steel enclosure
  • Safety Enclosure

    Safety Enclosure

    +

    Salient Features

    • Range: 50A to 630A
    • Load Break Switch with visible isolation
    • Confirms to IEC 60204
    • No. of Poles: 3, 4 & 6
    • IP55 & IP65
  • Rotary Switch

    Rotary Switch

    +

    Salient Features

    • Range : 6A to 63A
    • Tested at CPRI for AC23A duty
    • Self lifting terminals
  • Single Phase & Neutral

    Single Phase & Neutral DB Ex-Range

    +

    Salient Features

    • Aesthetically pleasing grey colour Internal Sliding Knob/ Latch
    • Easy removal of front doors/ change for left or Right
    • Gland Plates at top and bottom are removable for ease of use in entry and termination of cables
    • Clear embossed earthing marking for ease of installation
    • Cement guard are provded to restrict the entry of plaster or any foreign particles before installation of DB's at constructin stage
    • Identification labels are proveded for circuit
    • Gasket are provded to ensure Weather- Proof conditions.
    • Rmoval of front plate for easy maintenance
    • Optimized dimension ensur enough wiring space for easy cabling and maintenance
    • DIN Channel is provided with stoppers at the corner for avoiding slippage of devices
    • All distibution boards are supplied with insulated pin type copper busbar rating up to 200 A and Neutral bar
  • Single Phase & Neutral

    Single Phase & Neutral DB Dx-Range

    +

    Salient Features

    • Aesthetically pleasing grey colour Internal Sliding Knob/ Latch
    • Easy removal of front doors/ change for left or Right
    • Gland Plates at top and bottom are removable for ease of use in entry and termination of cables
    • Clear embossed earthing marking for ease of installation
    • Cement guard are provded to restrict the entry of plaster or any foreign particles before installation of DB's at constructin stage
    • Identification labels are proveded for circuit
    • Gasket are provded to ensure Weather- Proof conditions.
    • Rmoval of front plate for easy maintenance
    • Optimized dimension ensur enough wiring space for easy cabling and maintenance
    • DIN Channel is provided with stoppers at the corner for avoiding slippage of devices
    • All distibution boards are supplied with insulated pin type copper busbar rating up to 200 A and Neutral bar
  • Single Phase & Neutral

    Consumer Unit DB

    +

    Salient Features

    • Aesthetically pleasing grey colour Internal Sliding Knob/ Latch
    • Easy removal of front doors/ change for left or Right
    • Gland Plates at top and bottom are removable for ease of use in entry and termination of cables
    • Clear embossed earthing marking for ease of installation
    • Cement guard are provded to restrict the entry of plaster or any foreign particles before installation of DB's at constructin stage
    • Identification labels are proveded for circuit
    • Gasket are provded to ensure Weather- Proof conditions.
    • Rmoval of front plate for easy maintenance
    • Optimized dimension ensur enough wiring space for easy cabling and maintenance
    • DIN Channel is provided with stoppers at the corner for avoiding slippage of devices
    • All distibution boards are supplied with insulated pin type copper busbar rating up to 200 A and Neutral bar
  • Single Phase & Neutral

    Acrylic Cover

    +

    Salient Features

    • Aesthetically pleasing grey colour Internal Sliding Knob/ Latch
    • Easy removal of front doors/ change for left or Right
    • Gland Plates at top and bottom are removable for ease of use in entry and termination of cables
    • Clear embossed earthing marking for ease of installation
    • Cement guard are provded to restrict the entry of plaster or any foreign particles before installation of DB's at constructin stage
    • Identification labels are proveded for circuit
    • Gasket are provded to ensure Weather- Proof conditions.
    • Rmoval of front plate for easy maintenance
    • Optimized dimension ensur enough wiring space for easy cabling and maintenance
    • DIN Channel is provided with stoppers at the corner for avoiding slippage of devices
    • All distibution boards are supplied with insulated pin type copper busbar rating up to 200 A and Neutral bar