KHUSHALI ENTERPRISE

HPL

LV Switchgears

Luminaires

  • Consumer Lighting

    Aries

    +

    Salient Features

    • Aries is suitable for use with 1xT5 14W, 28W and 54W lamp
    • Housing: High quality extruded aluminium in white colour, prewired up to terminal block and with electronics Ballast the curved end caps are elegantly designed.
    • Colour: Grey colour in standard execution.
    • Lamp holder Bracket: White plastics.
    • Ballast: Aries is available in electronics ballast.
  • Consumer Lighting

    Striplite

    +

    Salient Features

    • Striplite is suitable for use with for 1xT8 36W fluorescent tubular lamp with all complete accessories.
    • Housing : Pre treated CRCA sheet steel with epoxy white powder coated finish. The luminaires is prewired up To terminal block and with electronics Ballast or open construction copper wound low watt loss Ballast.
    • Diffuser : Without diffuser.
    • Mounting : Wall and Surface Mounting and has connecting terminal in the centre of the luminaires for ease of installation.
    • Colour : White colour in standard execution and blue caps.
    • Lamp holder Bracket : White plastics. The end caps are elegantly designed.
    • Ballast : Striplite is available in Electronics and magnetic ballast and flicker free start.
  • Consumer Lighting

    Dawn

    +

    Salient Features

    • Dawn is suitable for use with for 1x14W and 28W T5 tube of with all complete accessories.
    • Excellent luminous efficacy.
    • Saves energy up to 45% as compared with conventional lamp.
    • Housing : Light weight aluminium extruded housing Engineering plastic housing white colour, made up white polycarbonate completely prewired up to terminal block and with electronics Ballast.
    • Mounting : Wall mounted light decorative luminaires.
    • Colour : White colour in standard execution.
    • Lamp holder Bracket : White polycarbonate /ABS with electrical grade brass contact.
    • Ballast : Dawn is available in electronics ballast and flicker free start.
  • Consumer Lighting

    Lunar

    +

    Salient Features

    • Lunar is an elegant batten suitable for use with for use with 1xT8 36W with all complete accessories.
    • Housing : Light weight engineering plastic housing with suitable end caps. the luminaires is prewired up to terminal block and with electronics Ballast
    • Mounting : Wall and Surface Mounting and has connecting terminal in the centre of the luminaires for ease of installation.
    • Colour : White colour in standard execution and Blue colour end caps.
    • Lamp holder Bracket : White polycarbonate /ABS with electrical grade brass contact.
    • Ballast : Luner is available in electronics ballast and flicker free start.
  • Consumer Lighting

    Astor

    +

    Salient Features

    • Astor is suitable for use with for 11W, 18W and 36W PLS & FP-L lamp with all complete accessories.
    • Housing : Pre treated CRCA sheet with epoxy white powder coated finish. The luminaires is prewired up to terminal block and with electronics Ballast or open construction copper wound low watt loss ballast.
    • Diffuser : Clear acrylic diffuser alternatively can also be provided with opal acrylic diffuser.
    • Mounting : Wall and Surface Mounting and has connecting terminal in the centre of the luminaires for ease of installation.
    • Colour : White colour in standard execution.
    • Lamp holder Bracket : White plastics. The end caps are elegantly designed. push fit type white polycarbonate with phosphor bronze contacts.
    • Ballast : Astor is available in electronic ballast and flicker free start
  • Consumer Lighting

    Ranger

    +

    Salient Features

    • Ranger is suitable for use with for 18W and 36W FP-L lamp with all complete accessories.
    • Housing : Pre treated CRCA sheet with epoxy white powder coated finish. The luminaires is prewired up to terminal block and with electronics Ballast or open construction copper wound low watt loss ballast.
    • Diffuser : Clear acrylic diffuser alternatively can also be provided with opal acrylic diffuser.
    • Mounting : Wall and Surface Mounting and has connecting terminal in the centre of the luminaires for ease of Installation.
    • Colour : White colour in standard execution.
    • Lamp holder Bracket : White plastics. The end caps are elegantly designed. push fit type white polycarbonate with phosphor bronze contacts.
    • Ballast : Ranger is available in electronics ballast and flicker free start.
  • Consumer Lighting

    Teeny

    +

    Salient Features

    • Decorative compact luminaries suitable for 36W FL-P fluorescent parallel lamp for domestic/ indoor application only.
    • Housing : Made up of CRCA sheet steel with self styled ABS ballast cover.
    • End caps : White coloured ABS plastic.
    • Finish : Epoxy powder coated white after phosphochromate treatment for rust free long life.
    • Lamp holders : White polycarbonate/ ABS with electrical grade brass contacts.
    • Electric gear : Pre-wired with 230V high frequency electronic ballast upto terminal block.
    • Mounting : Fixed on wall/ ceiling with the help of screws
  • Consumer Lighting

    Olympus

    +

    Salient Features

    • Olympus is suitable for use with for 1xCFL 9W and 25W fluorescent lamps with all complete accessories.
    • Housing : Engineering plastic housing white colour, made up white polycarbonate completely prewired up to terminal block and with electronics Ballast.
    • Diffuser : Opal diffuser fixed to the housing with a stainless steel rim to enhance aesthetics as well as prevent entry of dust and insects into the luminaires.
    • Mounting : Ceiling mounting and has connecting terminal in the centre of the luminaires for ease of installation.
    • Colour : White colour in standard execution.
    • Lamp holder Bracket : White polycarbonate /ABS with electrical grade brass contact.
    • Ballast : Olympus is available in electronics ballast and flicker free start.
  • Consumer Lighting

    Silicon/Magnum

    +

    Salient Features

    • Silicon is suitable for use with for 3-D Fluorescent lamps of 25W with all complete accessories
    • Housing : Engineering plastic housing white colour, made up white polycarbonate completely prewired up to terminal block and with electronics Ballast.
    • Diffuser : Opal diffuser fixed to the housing with a stainless steel rim to enhance aesthetics as well as prevent entry of dust and insects into the luminaires.
    • Mounting : Recess mounted round shaped ceiling light decorative luminaires and has connecting terminal is clamps.
    • Colour : White colour in standard execution and outer area is blue to improve appearance.
    • Lamp holder Bracket : White polycarbonate /ABS with electrical grade brass contact.
    • Ballast : Silicon is available in electronics ballast and flicker free start.
  • Consumer Lighting

    Halo/Halo With Fixture

    +

    Salient Features

    • Halo is suitable with for 11W spotlight with spiral miniature fluorescent lamp , domestic electronics ballast for low ceiling height application. Longer lamp life, high CRI and low temperature. Available in two CCT 3000K and 6000K
    • Housing : ABS housing with silver finished anti oxidant coasting high purity aluminium encapsulated reflector Gives consistent bright light output. Mini
    • spiral tri-phosphorous coasted lamp tube ensure better Lumen.
    • Mounting : Ceiling mounted light decorative luminaires.
    • Colour : White colour in standard execution.
    • Lamp holder : GU 5.3
    • Ballast : Halo is available in electronics ballast and flicker free start.
  • Commercial Lighting

    Athena

    +

    Salient Features

    • Athena is recessed down light is suitable for use of 5W to 8W spiral /mini retrofit compact fluorescent lamp.
    • Housing : MS Powder coated finish frame work with black powder coated MS bracket for holding reflector and Lamp holder.
    • Reflector : Anodized aluminium in specular finish.
    • Mounting : Ceiling mounting with 2 nos of spring steel clip retaining for positioning in false ceiling.
    • Hardware : MS Zinc plated & passivated.
    • Optics : Spun Aluminium ,specular finish reflector with diamond pattern on upper half and vertical facets on lower half for better glare control.
    • Lamp Holder : B22 ceramic lamp holder with electrical grade copper contacts provided as standards, wired up to terminal block mounted on adjustable frame.
    • Ballast : Electronics ballast.
  • Commercial Lighting

    Helios

    +

    Salient Features

    • Helios is recessed down light is suitable for use of 9W to 11W spiral /mini retrofit compact fluorescent lamp.
    • Housing : MS Powder coated finish frame work with black powder coated MS bracket for holding reflector and Lamp holder.
    • Reflector : Anodized aluminium in specular finish.
    • cMounting : Ceiling mounting with 2 nos of spring steel clip retaining for positioning in false ceiling.
    • Hardware : MS Zinc plated & passivated.
    • Optics: Spun Aluminium ,specular finish reflector with diamond pattern on upper half and vertical facets on lower half for better glare control.
    • Lamp Holder : B22 ceramic lamp holder with electrical grade copper contacts provided as standards, wired up to terminal block mounted on adjustable frame.
    • Ballast : Electronics ballast.
  • Commercial Lighting

    Zamak

    +

    Salient Features

    • Zamak is recessed down light is suitable for use of non retrofit compact fluorescent lamp 1x18W and 1x26W lamps in horizontal mounting position.
    • Housing : MS Powder coated finish frame work with black powder coated MS bracket for holding reflector and Lamp holder.
    • Reflector : Spun aluminium reflector brightened and anodized with specular for better light distribution and control on glare.
    • Mounting : Ceiling mounting with 2 nos of stainless steel clips for fixing the luminaire into the false ceiling.
    • Hardware : MS Zinc plated & passivated.
    • Optics : Spun Aluminium ,specular finish reflector with diamond pattern on upper half and vertical facets on lower half for better glare control.
    • Lamp Holder : white polycarbonate /ABS Lamp holder with electrical grade with copper contacts.
    • Ballast : Electronics ballast.
  • Commercial Lighting

    Cobalt

    +

    Salient Features

    • Cobalt is recessed mounted down light is suitable for use of non retrofit compact fluorescent lamp 2x18W and 26W lamps in horizontal mounting position.
    • Housing : MS Powder coated finish frame work with black powder coated MS bracket for holding reflector and Lamp holder.
    • Reflector : Spun aluminium reflector brightened and anodized with specular for better light distribution and control on glare. A bronze rim provided with the reflector to improve aesthetics
    • Mounting : Ceiling mounting with 2 nos of stainless steel clips for fixing the luminaire into the false ceiling
    • Hardware : MS powder coated plated & passivated.
    • Optics : Spun Aluminium ,specular finish reflector with diamond pattern on upper half and vertical facets on lower half for better glare control. Centre frosted glass to avoid glare and improve aesthetics
    • Lamp Holder : white polycarbonate /ABS Lamp holder with electrical grade with copper contacts.
    • Ballast : Electronics ballast & Magnetic ballast.
  • Commercial Lighting

    Gravity (SF) & (MF)

    +

    Salient Features

    • Gravity down light is suitable for use of non retrofit compact fluorescent lamp of 1x 18W and 2x18W.
    • Housing : MS powder coated white specular finish frame white and black powder coated MS brackets for holding Reflector and lamp holder.
    • Reflector : Spun aluminium reflector brightened and anodized with specular for better light distribution and control on glare.
    • Mounting : Fixed by false ceiling by two nos of spring clips.
    • Optics : Spun Aluminium ,specular finish reflector with diamond pattern on upper half and vertical facets on lower half for better glare control.
    • Lamp Holder : White poly carbonate/ABS lamp holder with electrical grade copper contacts.
    • Ballast : Electronics ballast.
  • Commercial Lighting

    Opera

    +

    Salient Features

    • Opera is recessed mounted mirror optics luminaire is suitable for use of twin 3xT5 14 W, 4xT5 14W and 4xT5 24W energy efficient fluorescent lamp.
    • Housing : Pre-coated white corrosion resistant housing having long life
    • Finish : Epoxy powder coated white after phosphochromate treatment.
    • Reflector : Electrochemically brightened and anodized high purity aluminium reflector with suitably designed cross Louvers assembly to offer wide distribution and minimized glare. Perforated Diffuser used to enhance aesthetics and also to creates soft lighting effects
    • Mounting : Provision of suspensions through Ø19mm conduits.
    • Optics : Reflector made up of high purity pre- anodised aluminium sheet high efficiency high quality mirror optics with aluminium faceted side reflector and serrated cross louvers.
    • Lamp Holder : Push fit type white polycarbonate/ABS with electrical grade copper contacts.
    • Ballast : High frequency energy efficient electronic ballast.
  • Commercial Lighting

    Classic

    +

    Salient Features

    • Classic is recessed mounted mirror optics luminaire is suitable for use of single or twin energy efficient fluorescent lamp 36W.
    • Housing : CRCA sheet housing Pre-coated white corrosion resistant housing having long life
    • Finish : Epoxy powder coated white after phosphochromate treatment.
    • Reflector : Electrochemically brightened and anodized high purity aluminium reflector with suitably designed cross louvers assembly to offer wide distribution and minimized glare. Perforated Diffuser used to enhance aesthetics and also to creates soft lighting effects
    • Optics : Reflector made up of high purity pre- anodised aluminium sheet high efficiency high quality mirror optics with aluminium faceted side reflector and serrated cross louvers.
    • Lamp Holder : Push fit type white polycarbonate/ABS with electrical grade copper contacts.
    • Ballast : High frequency energy efficient electronic ballast.
  • Commercial Lighting

    Cool Brite

    +

    Salient Features

    • Cool brite is recessed mounted mirror optics luminaire is suitable for use of twin 2X36 W and 3X36W energy efficient fluorescent lamp.
    • Housing : CRCA sheet housing Pre-coated white corrosion resistant housing having long life
    • Finish : Epoxy powder coated white after phosphochromate treatment.
    • Reflector : Electrochemically brightened and anodized high purity aluminium reflector with suitably designed cross louvers assembly to offer wide distribution and minimized glare. Perforated Diffuser used to enhance aesthetics and also to creates soft lighting effects(paralite P5 louvers)
    • Optics : Reflector made up of high purity pre- anodised aluminium sheet high efficiency high quality mirror optics with aluminium faceted side reflector and serrated cross louvers.
    • Lamp Holder : Push fit type white polycarbonate/ABS with electrical grade copper contacts.
    • Ballast : High frequency energy efficient electronic ballast & Magnetic ballast.
  • Commercial Lighting

    Brite

    +

    Salient Features

    • Brite is recessed mounted mirror optics luminaire is suitable for use of twin T5 14 W and 28W energy efficient fluorescent lamp.
    • Housing : CRCA sheet housing Pre-coated white corrosion resistant housing having long life
    • Finish : Epoxy powder coated white after phosphochromate treatment.
    • Reflector : Electrochemically brightened and anodized high purity aluminium reflector with suitably designed cross louvers assembly to offer wide distribution and minimized glare. Perforated Diffuser used to enhance
    • Optics : Reflector made up of high purity pre- anodised
    • Lamp Holder : Push fit type white polycarbonate/ABS
    • Ballast : High frequency energy efficient electronic ballast & Magnetic ballast.
  • Commercial Lighting

    Podium

    +

    Salient Features

    • Podium is surface mounted mirror optics luminaries is suitable for use of single & twin 36W energy efficient fluorescent lamp.
    • Housing : CRCA sheet housing Pre-coated white corrosion resistant housing having long life
    • Finish : Epoxy powder coated white after phosphochromate treatment.
    • Reflector : Electrochemically brightened and anodized high purity aluminium reflector with suitably designed cross louvers assembly to offer wide distribution and minimized glare. Perforated Diffuser used to enhance aesthetics and also to creates soft lighting effects
    • Mounting : Provision of suspensions through Ø19mm conduits.
    • Optics : Reflector made up of high purity pre- anodised aluminium sheet high efficiency high quality mirror optics with aluminium faceted side reflector and serrated cross louvers.
    • Lamp Holder : Push fit type white polycarbonate/ABS with electrical grade copper contacts.
    • Ballast : High frequency energy efficient electronic ballast & Magnetic ballast.
  • Industrial Lighting

    Storm Weather Proof Fixture

    +

    Salient Features

    • Corrosion resistant impact proof surface mounting luminaries with polycarbonate body factual impact dust and water resistant luminaries suitable for single or twin T5 and TL-5 lamp.
    • Housing : Made up corrosion resistant unbreakable poly carbonate body light and easy to handle
    • Cover : Clear polycarbonate cover with better light dispersive internal reeds.
    • Optics : Reflector made from powder coated white MS Sheet.
    • Lamp holder : Push fit type polycarbonate /ABS with electrical grade brass contacts.
    • Compliance : IP 65
  • Industrial Lighting

    Clean Room Bottom Opening

    +

    Salient Features

    • Clean room bottom opening luminaries suitable for twin linear fluorescent lamp pr twin/three FPL lamp with MS powder coated frame and acrylic cover.
    • Housing : CRCA sheet Steel
    • Finish : Epoxy powder coated white after phosphochromate treatment.
    • Mounting : Provision of suspensions through Ø19mm conduits or on ceiling with 4 nos holes of Ø5mm.
    • Optics : Reflector made up of high purity pre- anodised aluminium sheet.
    • Frame & Cover : Frame made up by mild steel MS and cover made up of methacrylate
    • Lamp Holder : Rotor type white polycarbonate/ABS with electrical grade copper contacts.
    • Ballast : High frequency energy efficient electronic ballast (THD < 33%) as standard
  • Industrial Lighting

    Highbay Open/Closed

    +

    Salient Features

    • High bay range of luminaries with specially designed reflector and suitable for 150W, 250W & 400W.
    • Luminaire housing : Black textured body coated with epoxy powder high pressure Aluminium Die – Cast. Mounting can be done by a hook on rubber grommet fixed on the Housing.
  • Industrial Lighting

    Lagacy

    +

    Salient Features

    • Legacy is industrial batten suitable for use with single or twin fluorescent lamp of 36W with all complete accessories.
    • Housing : CRCA sheet steel coated housing suitably coated in white to improve resistance against corrosion.
    • Colour : White colour in standard execution.
    • Lamp holder Bracket : Push fit type lamp holder made of ABS and having electrical grade brass contacts and Universal starter in case of luminaire with open construction copper wound ballast.
    • Ballast : Legacy is available in high frequency electronics ballast and magnetic ballast
  • Industrial Lighting

    Satin

    +

    Salient Features

    • Satin is industrial batten suitable for use with single or twin energy efficient fluorescent lamp of T5 28W and with all complete accessories.
    • Housing : Precoated M.S. Channel powder coated in off white colour.
    • Colour : White colour in standard execution.
    • Lamp holder Bracket : Push fit type lamp holder made of ABS and having electrical grade brass contacts.
    • Ballast : Satin is available in high frequency electronics ballast
  • Industrial Lighting

    Reflecto Dlx

    +

    Salient Features

    • Reflecto DLX is industrial batten suitable for use with single or twin energy efficient fluorescent lamp of T5 28W with all complete accessories.
    • Housing : Precoated M.S. Channel powder coated in off white colour.
    • Colour : White colour in standard execution.
    • Lamp holder Bracket : Push fit type lamp holder made of ABS and having electrical grade brass contacts.
    • Ballast : Reflecto DLX is available in high frequency electronics ballast.
    • Reflector : White powder coated.
  • Industrial Lighting

    Opna /Seguro

    +

    Salient Features

    • Asthetically designed circular shaped decorative wall light fixture suitable for 20W (TU) retrofit CFL.
    • Housing : Made up of high quality, high temperature resistant polycarbonate in black colour.
    • Reflector : Made up of high quality, high temperature resistant polycarbonate in white colour.
    • Cover : Circular ring in full moon shape made up of high quality, high temperature resistant polycarbonate in black colour, fixed to the housing with 4 nos. self tapping screws provided with the fixture.
    • Diffuser : Polycarbonate diffuser in opal matt finish for soothing light effect with enhanced UV stability and heat resistance.
    • Lamp holder : B22 ceramic lamp holder with electrical grade provided as standard, wired upto terminal block.
    • Electric gear : Pre-wired upto terminal block for CFL operation.
    • Mounting : Mounting by means of self-tapping screws provided with the fixture. Options provided in the mould of housing.
  • Industrial Lighting

    Well Glass Integarl /Non Integral

    +

    Salient Features

    • Vertical mounted Non integral well glass luminaries suitable for 70W sodium Vapour /metal halide and 18W/26W non retro CFL.
    • Housing : Single pieces pressure die cast aluminium alloy LM-6
    • Cover : Heat resistant glass bowl with zinc plated / galvanised MS wire Guard.
    • Finish : Epoxy powder coated white after phosphochromate treatment.
    • Optics : White PAINTED circular disc acts as reflector.
    • Lamp Holder : E27 ceramic lamp holder with electrical grade copper contacts.
    • Electric Gear : Use approximate CG Box as per selected HID lamp source.
  • Industrial Lighting

    Cfl Highbay (Polycarbonate )

    +

    Salient Features

    • Decorative, contrast reducing translucent polycarbonate medium bay suitable for 85W retrofit spiral CFL
    • Housing: Made up of polycarbonate
    • Cover: Made up of polycarbonate
    • Optics: UV stabilized polycarbonate with precisely contoured prismatic internal facets ensures Uniform and better light distribution.
    • Lamp Holder: Ceramic lamp holder (E27) with electrical grade copper contacts.
    • Electric Gear: Pre-wired upto terminal block for CFL operation
    • Mounting: Suspended By means chain provided with the fixture.
  • Outdoor

    Street Light T5

    +

    Salient Features

    • HOUSING : Single pieces deep drawn AL/ MS Sheet
    • Cover :UV Stablized acrylic cover with rubber gasket fitted with toggle
    • Finish: epoxy powder coating grey hosing & powder coated white reflector
    • Optics : reflector made of high purity preanodized.
    • Lamp holder : white polycarbonate housing with brass contact & SS Clips
    • Mounting : suitable for pole mounted with the help of two screw, OD 50MM
    • Height: 5-8m
  • Outdoor

    Street Light T5

    +

    Salient Features

    • HOUSING : Single pieces deep drawn AL/ MS Sheet
    • Cover :UV Stablized acrylic cover with rubber gasket fitted with toggle
    • Finish: epoxy powder coating grey hosing & powder coated white reflector
    • Optics : reflector made of high purity preanodized.
    • Lamp holder : white polycarbonate housing with brass contact & SS Clips
    • Mounting : suitable for pole mounted with the help of two screw, OD 50MM
    • Height: 5-8m
  • Outdoor

    Street Light (Extrusion Body)

    +

    Salient Features

    • HOUSING : Single pieces deep drawn AL/ MS Sheet
    • Cover :UV Stablized acrylic cover with rubber gasket fitted with toggle
    • Finish: epoxy powder coating grey hosing & powder coated white reflector
    • Optics : reflector made of high purity preanodized.
    • Lamp holder : white polycarbonate housing with brass contact & SS Clips
    • Mounting : suitable for pole mounted with the help of two screw, OD 50MM
    • Height: 5-8m
  • Outdoor

    Street Light DDTG

    +

    Salient Features

    • HOUSING : HOUSING made up of single pieces deep drawn aluminum sheet
    • Cover : toughened Glass
    • Finish: Hammer tone finish outside body and white paint inside
    • optics: side reflector made out of high purity preanodized aluminum sheet.
    • Lamp holder : Ceramics and electrical grade copper contacts
    • Mounting : suitable for arm OD -50mm dia max with two bolts.
    • Height: 70w (6-7m), 150w(7-9m),250w(9-10m)
  • Outdoor

    Street Light DCTG

    +

    Salient Features

    • HOUSING : Single pieces die cast AL LM-6
    • Cover : HEAT resistance toughened glass fixed to housing by toggle
    • Finish: epoxy powder coated grey
    • optics: pot optics AL reflector with high purity chip electro chemically brighting anodized.
    • Lamp holder : Ceramics and electrical grade copper contacts
    • Mounting : suitable for arm OD -60mm dia max with two bolts.
    • Height: 70w (5-7m), 150w(8-9m),250w(10-12m) 400w (12-14m)
    • Automatic on / off sensor in 70W / 150W street light
    • Code for fitting with sensor – HPLMHSTDC70E27WC / 150E40WC
  • Outdoor

    Flood Light

    +

    Salient Features

    • HOUSING : PRESSURE die cast AL LM-24 with heavy Duty hinged cover for safe & easy maintenance.
    • Cover : tempered protective toughened glass 5mm thick thermal shock & inpact resistant
    • Finish: epoxy black powder coated
    • optics: reflector made of high purity preanodized dimpled AL sheet.
    • Lamp holder : in Ceramics with silver plated contacts.
    • Mounting : wall/surface mounting using bracket
  • Accessories

    Electronics Ballast (Industrial) FTL

    +

    Salient Features

    • Industrial electronic ballast suitable for single T8/ T5 linear fluorescent lamps. In-built preheat start and cut-off circuits ensure enhanced lamp life with failure resistant ballast.
    • Suitable for 220-240V/ 50Hz
    • Ignition time < 2 secs Output Frequency >40KHz
    • High power factor (PF) >0.95
    • Total Harmonic Distortion (THD) < 10% IR radiation immune.
    • Circuit designed for higher (300V) mains voltage.
  • Accessories

    Electronics Ballast (Industrial) FTL

    +

    Salient Features

    • Industrial electronic ballast suitable for single T8/ T5 linear fluorescent lamps. In-built preheat start and cut-off circuits ensure enhanced lamp life with failure resistant ballast.
    • Suitable for 220-240V/ 50Hz
    • Ignition time < 2 secs Output Frequency >40KHz
    • High power factor (PF) >0.95
    • Total Harmonic Distortion (THD) < 10% IR radiation immune.
    • Circuit designed for higher (300V) mains voltage.
  • Accessories

    Gear Tray – Magnetic Ballast

    +

    Salient Features

    • Electromagnetic copper wound open construction ballast for 11W, 13W, 18W, 26W compact fluorescent lamp to be operated on 240, 50Hz supply.
    • Insulated Copper wire
    • Low loss silicon steel laminations
    • Vacuum impregnated high quality varnish
    • Long life and low temperature rise
    • Easy installation and wiring
    • Compact size
    • Mounting holes matches with most standard types of luminaries available
  • Accessories

    Copper Ballast

    +

    Salient Features

    • Industrial grade vaccum impregnated (VPIT) ballast designed to be operated at 220V-240V/ 50Hz mains supply.
    • Compact in size
    • Designed for 240V/ 50Hz., AC supply
    • Low loss silicon steel lamination
    • Super enamelled copper wire
    • Vaccum impregnated (VPIT) open construction
    • Low watt loss (less than12W)
    • Better heat dissipation
    • Hum free operation
    • Maximum winding temp. tw- 120 C, Temp. Rise. Dt- 70 C
    • Long life